_______________________________________________________________
_______________________________________________________________

• CHOP SAWS •  DECKS •  GREEN CHAINS • GRINDERS • 
•  INNOVATOR TUB GRINDER •  LOADERS •  MILL EQUIPMENT •  
•MISCELLANEOUS EQ •  PLANERS • RESAWS • ROLLCASES  • SKIDDERS • 

The above key is for Used Equipment page only. Click on the item word and it will take you to that item on this page. Click here to view Up Coming Auctions.

Click on small photos to view larger photos.

COMPLETE MILLS FOR SALE

-Complete Mill for Sale, Consisting of, 2001 Frick Auto Carriage; Cornell Gang; Mellott Rollcase; Precision Chip Pack;
Rosser Head Debarker; Cornell Gang; Item T10272; Contact Johnny Kimbel 865.617.6937 or James Savage 865.617.9122
$125,000.00
           

           

-Complete Mill Consisting of: 1997 Edmiston 4 Head Block Modular Mill; S/N-PBM751; Recon in 2004; Precision Model P636H Slope Track Rosser Head Debarker; S/N-D564; 2004 Edmiston 2 Saw Hydraulic Veritical Edger; S/N-VHE382E; Fulghum 60" 6 Knife Chipper; Phelps Chip Loader; Newman K20 2 Saw Right Hand Double End Trim; 87' Barn Sweep; Edmiston 30' 3 Strand Collector Deck; 36' 3 Strand Green Chain; 53' Fines Conveyor; 75' Edmiston 3 Strand Green Chain; 58' Patz Barn Sweep; Fruehauf 40' Chip Van; 1989 Dorsey 48' Flatbed; IR Air Compressor; All Starter Boxes & Electrical Boxes, Transfromer Box, Capacitors; Conduit & Wiring; All Steel Mill is sitting on; Contact James Savage, 865.617.9122; Item #T10378; Located in Tennessee. Click here for complete listing of equipment.
$125,000.00
           

NEW LISTINGS: 

-(2) 2005 Peerless 50' Open Top Trailer; w/Rollover Tarp; Item #T10700 & T10701; Contact James Savage at 865.617.9122
$23,500.00 each
           

-1983 Ferree Tandem Axle Lowboy w/Loading Ramps; Item #T10702; Contact James Savage at 865.617.9122
$10,000.00
       

-1988 Jones Portable Tub Grinder; S/N-88-168; w/Cat 3408 Engine; w/Single Axle Carrier; Item #T10703; Contact James Savage 865.617.9122
$60,500.00
           

-1992 Jones Mighty Giant Tub Grinder; S/N-PT92-882; PTO Driven; Item #T10704; Contact James Savage 865.617.9122
$38,500.00
   

-International Harvester 1586 Tractor; w/Enclosed Cab; Item T10705; Contact James Savage 865.617.9122
$3,850.00

-MDI TWA 2000 Metal Detector w/Conveyor; Item #T10650; Contact James Savage at 865.617.9122; Located in NC
$17,500.00
   

-(2) Fulghum Shaker Screen, 10' x 10; Item #T10651 & T10652; Contract James Savage at 865.617.9122; Locate in NC
$17,500.00 Each
   

-8' Cyclone w/Pipe; w/25 F Stand; w/Support System w/Cat Walk; Item #T10653; Contact James Savage at 865.617.9122
$15,000.00
   

-Sullair Rotary Air Compressor; Model 1S20S15011AC; S/N-003115302; Item #T10654 Contract James Savage at 865.617.9122
$25,000.00
   

-Cambio 40" Debarker; Model 40; S/N-40071 w/Tail Wheels; w/Hydraulic Power pack; w/Cab; Item #T10655; Contact James Savage at 865.617.9122
$50,000.00
           

-1989 Industrial Model NBN5449 600 HP Boiler; S/N-RMP600-19; item T10656; Contact James Savage at 865.617.9122
$50,000.00
           

-2001 Timberjack 840 Feller Buncher; w/22" Saw Single Tower; w/1400 Axles; w/8700 Hours; w/Like New Blade w/New Teeth; Engine Rebuilt 60 Hours ago; Replaced Hyd Stat Motor; Radiator Oil Cooler; 34" x 26 Tires; w/Enclosed Cab w/Air; w/Joy Stick Controls; S/N-WC840X002019; Located in Florida, Item #T10632; Contact James Savage 865.617.9122; 
$44,000.00
       

-2006 John Deere 310G Loader/Backhoe; 4x4; w/1752 Hours; w/4 in 1 Bucket; S/N-T0310GX958432; Item #T10630; Located in Florida; Contact James Savage 865.617.9122
$36,500.00
       

-2003 Case 40XT Skid Steer; w/1860 Hours; w/4 Cylinder Case Cummins Engine; S/N-JAF0388318; w/Hydraulic High Flow Oil System, Never used; Item #T10631, Located in Florida; Contact James Savage 865.617.9122 
$8,900.00
       

-(3) 2007 Light Towers; IR Lightsource 4 Light L6-4MH; w/Kubota Diesel Engine; w/Large Fuel Tank; 6KW; Run from 3000 to 5800 Hours; Item #T10633, T10634 & T10635; Located in Florida; Contact James Savage 865.617.9122
$5,200 Each
       

-1995 Cleereman Model 38 3 Head Block Carriage; w/4x5 Saw Cab; w/Cleereman Husk Frame; w/Off Bearing Belt; w/Trackway; w/Tyrone Berry 230 Carriage w/Drive; w/Corley 36 Bar Type Log Turner w/Motor & Starter; Contact James Savage 865.617.9122; Item #T10602
$36,000.00
           

   

-Morbark 58" 3 Knife Chip Pac w/6x6 Chip Screen; w/Collector; w/Oscilating 36" Loading System; w/100 HP Motor on Chipper; w/Starters; Contact James Savage 865.617.9122; Item #T10603
$26,500.00
           

-35' 3 Strand Green Chain; w/#78 Chain; w/Electric Drive; Contact James Savage 865.617.9122; Item #T10615
$4,500.00

-24" x 58' Rollcase w/Hydraulic Drive; w/10 HP Hydraulic Power Pack; Contact James Savage 865.617.9122; Item #T10616
$4,500.00
   

-24" x 10' Slab Drop w/Cylinder; Contact James Savage 865.617.9122; Item #T10617

$3,500.00

-Winston Machinery 16' 3 Strand Transfer Deck w/Drive; Contact James Savage 865.617.9122; Item T10620

$4,000.00

-Miner 48" x 8" Combination Gang Edger w/Infeed & Outfeed w/Motor; Contact James Savage 865.617.9122; Item #T10618

$8,500.00

-Edmiston 22' 3 Strand Log Deck w/3 Arm Stop &  Loader; w/Nose Skids; w/Drive; Contact James Savage 865.617.9122; Item #T10619
$4,500.00

-35' Incline Waste Conveyor; w/110 Ladder Back Chain; w/Drive; Contact James Savage 865.617.9122; Item #T10601
 3,500.00

-Hydro Ax 611B Series II Cutter; w/5.9 6BTA Cummins Engine; w/20" Harricana Head w/Quadco Disc; w/28L26 Tires; w/Heavy Duty Axles; 1181 Actual Hours; One Owner; Contact James Savage 865.617.9122; Item #T10501
$35,000.00
   

-Cat 3406 55 HP 365 KW Gen Set; w/8958 Hours; w/Residential Muffler; w/50 Gall Day Tank; Contact James Savage 865.617.9122; Item #T10502
$35,000.00
   

-CTR 42IP Long Frame Saw Buck; w/Approx 1000 Hours; 20'; Contract James Savage 865.617.9122; Item #T10504
$10,000.00

-CTR 42IP Short Frame Saw Buck; Approximately 400 Hours; 12' Frame; Contact James Savage 865.617.9122; Item #T10503
$10,000.00

SOLD!-Precision Model P742H Rosser Head Debarker; Item T10273 w/4' x 4' Stand Alone Cab; w/40 Hp Motor; w/Controls; w/Barn Sweep; S/N-571; Contact James Savage 865.671.9122
$36,500.00
       

    

-Precision 19' 3 Strand Log Deck; Item T10274; w/3 Arm Stop and Loader; w/Hyd Drive; Contract James Savage 865.671.9122
$5,500.00

-54" x 44' Log Trough; w/3 Arm Kickers w/Hydraulic Drive; Item #T10271; Contact James Savage 865.617.9122
$9,500.00

-Prescott 5' Band Mill; Item #T10252; w/Off Bearing; w/Meadows 4 Head Block Manual Set Carriage w/Overhead Debarker; w/Husk Frame Not Installed; w/Stainless Suction Blower 60" Inlet; 18" Outlet; w/Frick 2 Saw Edger w/Gas Powered Engine; All Filing Equipment for Prescott Band Mill; w/(13) Extra Bands; Contact Johnny 865.617.6937 or James 865.617.9122
$25,000.00
       

       

-Gas Powered Auto Chop Saw; Item #T10253; Contact Johnny 865.617.6937 or James 865.617.9122
$6,000.00

-John Deere 225 HP Power Unit w/PTO; Item #T10254; Contact Johnny 865.617.6937 or James 865.617.9122; Completely Rebuilt w/Less than 1,000 Hours
$6,500.00

SOLD!-Heavy Duty 20' 4 Strand Collector Deck; Item T10346; w/#78 Rooftop Chain; w/Variable Speed Reversible Drive; Contact Johnny 865.617.6937 or James 865.617.9122
$4,000.00
   

-5 Strand Unscrambler; Item #T10347; w/Hydraulic Drive; w/Even End Rolls; w/Electric Drive
$4,500.00

-5 Strand Unscrambler Item #T10248; w/Electric Drive; Contact Johnny 865.617.6937 or James 865.617.9122
$4,000.00
   

-Morbark 58" 6 Knife Chip Pack; w/Vibrating Conveyor & Parts; Item #T10260; Contact James Savage, 865.617.9122
$33,000.00
       

-HMC Rosser Head Debarker; Item #T10262; w/Slant Track; w/Cab with Heat & Air; w/40 HP Motor & Controls; w/24" x 30' Belt Conveyor; w/Drive; Contact James 865.617.9122 
$15,000.00
   

-Custom Built 24" x 50' Waste Conveyor; Item #T10263; w/24" Belt; w/Drive; Contact James Savage 865.617.9122
$5,000.00

SOLD!-48" x 80' Log Conveyor; Item #T10265; w/WD110 Chain; w/(2) Sets of Kickers; w/Drive; Contract James  865.617.9122
$15,000.00
   

-30' 4 Strand Log Deck; Item #T10267; w/4 Arm Stop and Loader; w/WR78 Chain; w/10 HP Drive; Contact James 865.617.9122
$5,000.00
   

-Corley 34' 5 Strand Log Deck; Item #T10266; w/25' Custom Built Extension; w/Nose Skids, Stop & Loader; w/Drive; Fire Damage on Nose Skids and Drive; Contact James Savage 865.617.9122
$3,000.00

 MILL EQUIPMENT:

-Log Cut Up System; Item #T10149; w/60 HP Motor; w/72" Saw; w/Outfeed Log Trough w/Adjustable Stops for Pallet Length Material & Air Operated Stop; w/Log Kickers for 8' to 18' Logs; w/Hydraulic Power Pack & Controls; Contact James Savage 865.617.9122
$50,000.00
         

-Morgan 10 HP Chop Saw; Item #T10147; Contact James Savage 865.617.9122
$2,000.00

-Modular Mill with Corinth 2 Head Block Carriage; Item #T10230; w/Husk Frame w/Off Bearing Belt; w/30 HP Hydraulic Carriage Drive w/Drum Package; w/Saber Computerized Setworks; w/4' x 5' Control Cab; w/Mellott #5 Chain Type Log Turner; w/Controls; w/10 Hp Hydraulic Power Pack; w/56" Circle Saw; w/150 HP 230/460 Volt 1775 RPM Motor; Out and Ready to Load. Contact James Savage 865.617.9122
$16,500.00
           

-S & W Band Saw Mill; Item #T10197; Model 125; S/N-13299; w/40 HP Electric Motor; w/Log Deck; Contact James Savage 865.617.9122
$18,000.00

SOLD! -Genco Westinghouse 9592 DC Drive; S/N-25S17P930; w/300 HP Motor; 460 Volt; Just Rebuilt; w/Extra Parts; Item #T10037; Contract Johnny Kimbel 865.617.6937 or James Savage 865.617.9122
$30,000.00
       
       

GANGS, TRIMMERS & EDGERS: 

-Ligna Right Hand 16' 9 Saw Drop Saw Trimmer; S/N-F161815; w/7.5 Hp Motors; w/Block Conveyor; w/Hydraulic Transfer; w/Lumber Lugs; w/(2) 5 HP Hydraulic Power Packs & Controls; w/Motor Control; Contact James Savage 865.617.9122; Item #T10246
$25,000.00

 
PLANERS: 

-(2) Newman Model 512 Planer; S/N-16222; w/Bottom Profile; 8" x 14" Capacity; Westinghouse 100 HP 460 Volt 1175 RPM Motor; Controls; Item #T10099; Contact Johnny Kimbel 865.617.6937 or James Savage 865.617.9122
REDUCED! $18,000.00 EACH

MISCELLANEOUS EQUIPMENT: 

-Superior Machine 30 x 40 Chip Feeder; Item #T10123 Contact James Savage, 865.617.9122
$5,500.00 each
   

SKIDDERS: 

SOLD!-John Deere 648G Grapple Skidder; Item #T10242; w/Winch; w/Enclosed Cab; Contact James Savage 865.617.9122
$24,000.00
       

SOLD!-John Deere 640D Cable Skidder; w/28L26 Tires; Item #T10241; Contact James Savage 865.617.9122
$18,500.00

SOLD!-Cat 525B Grapple Skidder w/Winch; Item #T10243; Has Bad Engine; Contract James Savage 865.617.9122
$14,000.00

LOADERS: 

SOLD!-Barko 160D Knuckleboom Loader; Item #10239; w/Joy Stick Controls; w/Continuous Grapple; w/6 Cylinder Cummins Engine; w/Saw Package Hookup; w/2900 Hours; Mounted on Self Propelled Carrier; Contact James Savage 865.617.9122
$28,500.00
   

-Husky 125 Log Loader; w/3 Cylinder Detroit Power Unit; w/(4) Outriggers; Trailer Mounted; Item #T10247: Contact James Savage 865.617.9122
$5,000.00

FELLER BUNCHER:

-Franklin C500D Cutter; Item #T10261; w/20" Koehring Saw Head; w/1,700 Hours: Contact James Savage 865.617.9122
$44,000.00

         
BACK TO TOP

HOME    AUCTIONS   JOIN OUR MAILING LIST