PO BOX 567 KINGSTON, TN 37763  • 800.334.4395 • 865.376.7009 • FAX 865.376.9103 •

HOME    AUCTIONS      BROKERED EQUIPMENT     JOIN OUR MAILING LIST

COMPLETE SCRAGG & SAWMILL OPERATION FOR SALE AS A GOING BUSINESS 
LOCATED IN KENTUCKY. 
FOR ADDITIONAL INFORMATION CONTACT JOHNNY KIMBEL 
AT 865.617.6937 OR 800.334.4395 FOR INFORMATION.

-CMC Modular Mill; w/3 Head Block Left Hand Carriage; w/Chain Type Log Turner; w/In Track Carriage Drive; w/Cooling System & Reservoir Tank; w/5’ x 5’ Cab; w/Silvatech Controller w/Joy Stick; w/Toshiba 150 Hp 460 Volt 1770 RPM Motor (Powering Main Saw and Carriage Drive); w/All Steel Husk Frame; w/Off Bearing Belt
kentucky mill 418.jpg (146092 bytes)

-CMC Modular Mill; w/3 Head Block Right Hand Carriage; w/Chain Type Log Turner; w/Nose Skids; w/Stop & Loader; w/CMC 75 Hp Hydraulic End Of Track;  Carriage Drive; w/All Steel Husk Frame;  w/Off Bearing Belt; w/56” F Style Circle Saw; w/4’ x 4’ Cab  
kentucky mill 442.jpg (156166 bytes)
 

-CMC 24” x 19’ Rollcase; w/Slab & Lumber Dump; w/Drive

-Ligna Rollcase, 30” Wide x 21’ Long; w/8” Rolls; w/Pop Up Transfer, 54” 5 Strand; w/Hydraulic Drive w/Built In Stop Gate

-Jocar Model SERRA 1600 Slanted 60” Line Bar Resaw; w/Hydraulic Strain; w/125 Hp 460 Volt Motor; w/7’ x 5’ Control Cab; w/Allen Bradley Panel view 550 PLC 502 Controls; w/20’ Slanted Infeed Rollcase w/Press Rolls; w/Positioner & Turners; w/Jocar 20’ Outfeed; w/Cant & Board Separating System; w/25 Hp Hydraulic Power Pack; w/Dual 15 Hp Hydraulic Power Packs; w/Reservoir Tank; w/4 Hp Hydraulic Power Pack; w/Merry Go Round Turn A Round System; w/Guide Dresser
kentucky mill 460.jpg (44810 bytes)    kentucky mill 458.jpg (153709 bytes)    kentucky mill 459.jpg (150167 bytes)    kentucky mill 457.jpg (136705 bytes)    

kentucky mill 511.jpg (40037 bytes)    kentucky mill 512.jpg (38395 bytes)

-Big Jake Sharp Chain Scragg; w/20 Hp Hydraulic Power Pack; w/Twin 14’ Slab Drops; w/Dual Belt Tailing System; w/21’ Infeed with Press Rolls; w/(2) 48” Circular Saws; w/(2) 125 Hp Motors; w/Building; GE 8000 Line Controls Center, 40’ Eve Height
kentucky mill 481.jpg (146577 bytes)  kentucky mill 482.jpg (156759 bytes)    kentucky mill 482.jpg (156759 bytes)    kentucky mill 485.jpg (154121 bytes)

-60” x 8’ Material Belt from Dual Slab Drop

-Baker End Dogging Scragg; w/(2) 30” Circular Saws; w/Twin Off Bearing Belt; w/(2) Motors, Approximately 50 HP ; w/Material Belt Outfeed, 13’ Long;  w/48” Belt; w/Baker 19’ 4 Strand Infeed Transfer Deck, 75” Wide; w/C55 Rooftop Chain;  25 Hp Hydraulic Power Pack
kentucky mill 492.jpg (146490 bytes)    kentucky mill 490.jpg (140515 bytes)    

-1995 West Plains Multi Select Chop Saw; w/(3) 20 Hp Chop Saws; w/Cant Infeed Unscrambler; w/Cant Positioner

-Brewer 3 Head Multi Select Chop Saw System; w/Brewer 400U Unscrambler; w/Brewer 13’ 2 Strand Package Deck

-Pendu Double Arbor Gang; w/Infeed with Cant Positioner; w/Hydraulic Feed Rolls; w/100 Hp Motor on Top Arbor; w/75 Hp Motor on Bottom Arbor  

-1994 Woodmizer 4 Head Resaw System; w/Turn-A-Round
kentucky mill 561.jpg (33954 bytes)

-Lots of Shop Equipment

-Cat Loaders
kentucky mill 598.jpg (152706 bytes)

-Toyota & Hyster Forklifts
kentucky mill 585.jpg (144028 bytes)

-Freightliner Truck

-Trailers

-Scale
kentucky mill 614.jpg (136170 bytes)

BUILDINGS:  

-Pre-Fab Free Span Building; 150’ Long x 100’ Wide; w/Cat Walks and Steps Around Equipment; w/Steel Supports for Equipment; 18’ x 60’ Addition, 14’ x 60’ Wood Frame Addition for Resaw, 35’ x 30’ Addition for Trimmer

-35’ x 40’ Partially Enclosed Wood Frame Building Inside Open Building

-Open Sided Open Ended Storage Building, 72’ x 160’

-Prefab Building (Green Chain Building), 30’ Wide x 90’ Long; Open Sides and Ends

 

TRI-STATE AUCTION & REALTY, LLC
JOHN C. KIMBEL, JR.
PO BOX 567
KINGSTON, TN 37763
865.376.7009  800.334.4395
CELL PHONE: 865.617.6937 
FAX 865.376.9103
email: auctions@tristate-auction.com
TN FIRM LIC #1129

Hit Counter

HOME    AUCTIONS      BROKERED EQUIPMENT     JOIN OUR MAILING LIST